Dräger X-am 8600 Multi-Gas Detector

Highlights

Clearance measurement has never been this easy and convenient: The Dräger X-am 8600 1- to 7-gas detector detects toxic and combustible gases, vapours and oxygen simultaneously, whether in pump or diffusion mode. The Dräger Gas Detection Connect software offers live data transmission and powerful fleet management. An easy-to-understand signalling design and practical software features ensure comprehensive process reliability at low operating costs.

Specialised for use with a pump, optimised for "clearance measurement" application

The Dräger X-am 8600 is equipped with a very powerful pump. It can be connected to hoses up to 45 metres long. A pump adapter makes it easy to switch between diffusion and pump mode at any time. This means that the pump is only operated when you really need it. That saves energy, reduces wear and tear, and extends the lifespan of the pump.

Handy and durable, the Dräger X-am 8600 is intuitive to operate single-handedly using three large function buttons. The clear colour display shows you all the information in an easy-to-read format.

The device has advanced software functions, including changing the measured gas for PID, CatEx and IR sensors during use based on an integrated library. Favourite gases can be defined within the library so that the relevant gases from the library are displayed on the device when the measured gas is changed.

The standard equipment includes a sturdy shoulder strap that allows you to transport the X-am 8600 comfortably, even in industrial environments.

Convenience and safety through software functions

The option to automatically switch the measuring ranges makes measuring easier when monitoring for possible high methane concentrations: If the Cat-Ex sensor measures values above 100% lower explosive limit, the display switches to the range of 0 to 100 Vol%.

The CatEx SR DrägerSensor offers a special setting for the measured gas methane, which enables measurements in the ppm range.

Clear signalling design

The signal system of the Dräger X-am 8600 is based on a clear colour code:

• Red light = gas alarm
• Yellow light = device-related alarms, such as when the rechargeable battery needs to be charged
• Green light = device is ready for use

The green glow of the D-light allows you to see from a distance whether the device has been properly tested and is ready for use.

In case of an alarm, the X-am 8600 alerts you with colour-coded alarm LEDs, a loud alarm (100 dB(A) at a distance of 30 cm), and clear vibration. Four preset hazard symbols are available for the display which explicitly indicate the presence of an explosion hazard or toxic gases and vapours, for example. This allows the user to quickly and reliably recognise the type of hazard based purely on the symbol displayed.

The X-am 8600 is equipped with impact detection. The event report indicates whenever severe mechanical impacts have occurred that might result in functional impairment of the device or the sensors. The workshop technician can use this information to systematically check the device. Optionally, the X-am 8600 can also be locked for use immediately after a serious impact has been detected.

Efficient fleet management

Display check and adjustment are carried out simply and quickly using the Dräger X-dock calibrating station. Its low test gas consumption keeps operating costs to a minimum.

The Gas Detection Connect software is an ideal addition to fleet management. For example, the software offers a reporting function and numerous other useful features, such as firmware updates and the setting of device parameters (Smart Configuration) in the X-dock automatic test station. For example, alarm thresholds can be set automatically and locally in Gas Detection Connect (GDC) and transmitted to the device via the X-dock. To identify the devices in the fleet, the usual barcodes or an integrated RFID transponder can be used.

Easy-to-replace spare parts – including the power supply – and durable sensors ensure that your devices stay ready for use for many years. Existing, relevant accessories from the X-am 8000/3500 predecessor can be reused.

Powerful data analysis in the cloud

Safety and efficiency via network connection: Transfer your recorded data conveniently via Bluetooth® directly to a smartphone or the Dräger ConHub, and from there to the backend of the Gas Detection Connect software. As an alternative, you can also easily transfer the data to the X-dock test station. This way, you have secure access to your data and its analysis at any time and anywhere – simply via your internet browser

Inductive charging protects against wear

The X-am 8600 is charged inductively. This makes it easier to manage and increases the lifespan of the device. This prevents issues such as corrosion and contact problems in the charging cradle. You can charge (outside of explosion-hazard zones) and measure at the same time, e.g. when in use inside vehicles or on machinery.

The charging cradles can be connected with one another, taking up minimal space, and are compatible with existing Dräger X-am series cradles. This means that several gas detectors of different designs and types can be charged at the same time.

Specialist for high and low hydrocarbon concentrations

For measuring volatile hydrocarbons, you can equip the Dräger X-am 8600 with one of two different PID sensors: The PID HC neo covers a measurement range from 0 to 2,000 ppm (isobutene). The LC neo PID is ideal for a measurement range of 0 to 10 ppm (isobutene) with a high resolution in the range below 1 ppm.

Focus on sustainability

The device was designed with sustainability in mind. The durable Dräger sensors as well as the rechargeable and easy-to-replace power supply ensure that the device has a long period of use. Almost all spare parts can be switched out by trained users, and all remaining parts can be replaced by Dräger Service. Existing accessories from previous series can be reused. Environmental protection has also been taken into account for the technical documentation and packaging: These have been designed to save paper and, if more than two devices are ordered, the number of technical documents supplied can be reduced if the modular version of the device is ordered. Dräger takes old devices back and ensures they are properly recycled.